|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
|
|
Design of the supporting structure of the elementary school
Vintrová, Tereza ; Huryta, Ladislav (referee) ; Zich, Miloš (advisor)
The diploma thesis deals with the design of the load-bearing structure of the main building of the primary school in the village of Hrušovany u Brna, followed by the assessment of selected parts of the structure. The building is designed as a monolithic skeleton based on foundation slabs, which, together with the basement walls, form a "white tank." The subsequent assessment focuses primarily on the foundation structures, walls, roof slab, selected columns, and the staircase. Computational models and the internal forces obtained from them were created using the SCIA Engineer software. The thesis includes a static calculation and drawing documentation. The thesis was conducted in accordance with applicable standards.
|
|
|
Commercial building in Brno - the construction technological planning
Sedláček, Stanislav ; Štěpán, Richard (referee) ; Motyčka, Vít (advisor)
The aim of my thesis was to perform construction and technological preparation of the construction of commercial house in Brno in the street Křídlovická. The introduction contains the expected design and construction process of the proposed building as a whole. It is also prepared a preliminary draft of the financial cost of the entire project designed according THU and object schedule. Furthermore, the implementation of the project construction site for a major part of the commercial house. Gradually work focuses mainly on the implementation of the technological stage of construction site with detailed processing procedure for the implementation of monolithic concrete structures of the building.
|
|
|
Multifunctional Building
Velecký, Tomáš ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
This diploma thesis is focused on design cast-in-place reinforced concrete structure multi-storey multifunctional building according to the source material. Specifically, foundation slab and external wall in B1 taking into account the waterproofness of the construction. Then staircase, column in lowest storey and two floor slab are designed as selected load-bearing structure. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the diploma thesis are drawn drawings of the shapes and reinforcement.
|
|
|
Apartment building R7
Svitálková, Tereza ; Kučírek, Pavel (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor's thesis was to design and after that to develop a project documentation for a new apartment building R7. The apartment house is located on a plot in Praha – Karlín, Rohasnké nábřeží. The building is designed as a free-standing building with three aboveground floors and one basement. The floor plan of the basement reminds rectangle. There are cellars, garage, and technical facilities in the basemant. On the upper floors there are fifteen aparment units, five units on each upper floor. All apartments on ground floor have its own terrace; apartments on the sedond and the third floor have balconies. The apartment building is based on reinforced concrete foundation slab. The structural system of the basement is also made of reinforced conctrete and is consisted of colomns, beams and walls. The whole envelope of the underground is made from underground waterproofing system – a white tank. The external and internal load-bearing masonry of the upper floors is made of ceramic blocks. The ceiling structure with the balconies is made of reinforced concrete floor slab. The staircase is prefabricated. An elevator is located next to the arms of the staircase. The roof of the aparment building R7 is flat and partly walkable. The exterior building´s envelope is insulated with the ETICS contact thermal insulation system.
|
|
|
Apartment building
Thomajer, Viktor ; Brabec, Roman (referee) ; Brukner, Bohuslav (advisor)
The main task of bachelor’s thesis was to design an apartment building and to create the project design documentation in accordence with the law in Czech Republic. My object is an four-storey apartment building in Hradec Králové (Czech Republic). The building is consisting of one underground floor with the parking for residents and another 3 floors above the ground with the 25 apartments. Construction system of underground floor combine the elements of inner concrete columns and external walls on the foundation slab made of watertight reinforced concrete. This kind of foundation is called „white tank“ and except of load-bearing function fully provides the waterproofing solution under the ground. The rest of floors are made of ceramic blocks as the system of two-way load-bearing walls. External walls are insulated with mineral wool insulation according to ETICS. Floor slabs are designed as cast-in-place concrete structure. The roof is flat with the 2% of slope with wateproofing layer of PVC foil. All necessary utility structures are situated close to the building area and can be reach easilly. As the main source of energy for heating was designed heat exchanger system supported from hot-water sytem of city Hradec Kralové.
|
|
|
Load-bearing reinforced concrete structure of a family house
Borovec, Michael ; Januš, Ondřej (referee) ; Zlámal, Martin (advisor)
The final thesis is focused on designing reinforced concrete load-bearing structures of a detached house on two floors and one basement. In the basement will be located the storages, utility room and wine bar. On the ground floor will be located garage for two cars, living room with kitchen and study. On the second floor will be located bedroon and two child’s rooms. The ceiling slab of the second floor, the ceiling slab of the ground floor, the ceiling slab of the basement, spiral staircase, half-turn staircase and walls of the first underground floor with solution as water-resistant construction. Programs SCIA Engineer 21.1 and Dlubal RFEM are used to calculate the internal forces. To varify the accuracy of the results is used manual calculation. The work includes drawings of formwork and reinforcement of the all designing structires. The bulding is designed according to ČSN EN 1992-1-1.
|
|
|
Apartment building in Ivančice - construction technology project
Fejfar, Michal ; Novotný, Michal (referee) ; Venkrbec, Václav (advisor)
The subject of the master´s thesis technological project of the Ivančice residential building in Ivančice. The building has one underground and four aboveground floors. The master´s thesis contains a technical report for the building technology project, broader transport routes, a timetable, a financial plan, time schedule, design of construction site installations, design of mechanical assemblies, technological prescription for construction of celling white tank, inspection and test plan, crane and design.
|
|
|
The possibility of using admixtures for waterroof concrete
Roháček, Lukáš ; Voves, Jiří (referee) ; Hubáček, Adam (advisor)
Bachelor thesis is mainly focused on additions, that have impact on water impermeability and other properities of fresh and hardened concrete. This issue is also described in short section, which is took from foreign reaserch. Thesis further discusses about the standards and regulations that determine, what properties should have waterproof constructions. Experimental part is showing influence of fly ash, slag and silica fume on conzistency, hydratation heat development, strenght, water impermeability, frost resistance and volume changes of the concrete.
|
|
|
Architectural study of the cycling stadium / runway / Favorit Brno / on the open space in.
Dvořáková, Šárka ; Ing. arch. Petra Žalmanová, Ph.D (referee) ; Šindlar, Jiljí (advisor)
A specialized project of „Architectural study of modification of the bicycle stadium Favorit Brno in the BVV area and urban design of the Hněvkovský sports complex in Komárov“ preceded the diploma thesis. The aim of the project was preparation of the area for cycling stadium with all the necessary facilities and functional connections. The diploma thesis develops a previous project and elaborates the compound of the cycling stadium in a form of a study. The building should recpect to the current demands of this sport, such as a closed roof of the building, siberian pine track material and a 250-meter track length. The building will be situated in the area adjacent to the current biker complex in Brno Komárov.
|
guest ::
